SEARCH RESULT :

Features

Digitally displays the rotational position of the pressure adjusting handle. Extremely convenient in applications where frequent pressure adjustment is required.

Features

These are valves for steel equipment and machinery.

Features

The pressure/temperature compensation control maintains the set flow rate regardless of changes in the load pressure and fluid temperature. Capable of flow rate control from the minimal flow rate of 0.01 L/min. Adopts a structure that minimizes occurrences of jumping.

• Electronic Catalogs   ( 367 KB)

• Cross-sectional views and seal parts   ( 218 KB)

Features

The pressure/temperature compensation control maintains the set flow rate regardless of changes in the load pressure and fluid temperature. Capable of flow control over a wide range from minimal flow rate to high quantity flow rate.

• Electronic Catalogs   ( 443 KB)

• Cross-sectional views and seal parts   ( 265 KB)

Features

The built-in check valve controls the flow in one direction while keeping free flow in the other direction. Since oil leakage of this check valve is less, it is capable of flow rate control of minimal flow rate to the fully closed state.

• Electronic Catalogs   ( 408 KB)

• Cross-sectional views and seal parts   ( 270 KB)

Features

The temperature compensation control maintains the set flow rate regardless of changes in the fluid temperature. Adopts a structure that minimizes fluid leakage in the fully closed state.

• Electronic Catalogs   ( 355 KB)

• Cross-sectional views and seal parts   ( 233 KB)

Features

The structure with high pressure balance enables easy operation of the handle even at a high pressure. The compact design minimizes the installation space. Facilitates fine adjustment of the flow rate.

• Electronic Catalogs   ( 525 KB)

• Cross-sectional views and seal parts   ( 228 KB)

Features

The temperature compensation control maintains the set flow rate regardless of changes in the fluid temperature. Available in a variety of configurations according to the travel direction of the table and piping direction. Capable of controlling the sequence: rapid traverse → slow feed → rapid return.

• Electronic Catalogs   ( 431 KB)

• Cross-sectional views and seal parts   ( 181 KB)

Features

Check valves for flow control valve SF-G02 and throttle valve ST-G02 to be stacked below SF-G02 or ST-G02.

• Electronic Catalogs   ( 302 KB)

• Cross-sectional views and seal parts   ( 302 KB)

Features

Digitally displays the rotational position of the pressure adjusting handle. Extremely convenient in applications where frequent pressure adjustment is required.

Features

LS-G02 is a solenoid valve with low-wattage type coil (DC:5W or AC:12W). Low current requirement for the valve allow it to be driven directly from a programmable sequence controller.

• Electronic Catalogs   ( 880 KB)

• Cross-sectional views and seal parts   ( 240 KB)

• CompatibilityTable   ( 225 KB)

Features

LS-G03 is a solenoid valve with low-wattage type coil (DC:5W or AC:12W). Low current requirement for the valve allow it to be driven directly from a programmable sequence controller.

• Electronic Catalogs   ( 659 KB)

• Cross-sectional views and seal parts   ( 429 KB)

Features

Realize high-pressure large-flow-rate control at 35 MPa and 100 L (G02) or 160 L/min (G03). Best suited to integration into European Safety Standard (CE) compliant equipment because of dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade.

• Electronic Catalogs   ( 1759 KB)

• Cross-sectional views and seal parts   ( 225 KB)

• CompatibilityTable   ( 225 KB)

Features

The capability to switch the valve with a minute signal current (approximately 10 mA) enables direct drive from a programmable sequence controller.

• Electronic Catalogs   ( 377 KB)

Features

Adoption of the shockless spool enables smooth reversal and stopping of the load. Best suited to integration into European Safety Standard (CE) compliant equipment because of dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade.

• Electronic Catalogs   ( 645 KB)

• Cross-sectional views and seal parts   ( 189 KB)

Features

Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 300 L/min. Best suited to integration into European Safety Standard (CE) compliant equipment because of dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade. Models equipped with a built-in check valve for pilot pressure are also available.

• Electronic Catalogs   ( 1426 KB)

• Cross-sectional views and seal parts   ( 198 KB)

Features

Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 700 L/min.

• Electronic Catalogs   ( 553 KB)

Features

Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm2} and 1100 L/min.

• Electronic Catalogs   ( 519 KB)

Features

The highly reliable KSO－G02 adopted as the pilot valve ensures long service life and stable operation. Best suited to integration into European Safety Standard (CE) compliant equipment because of dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade.

• Electronic Catalogs   ( 689 KB)

• Cross-sectional views and seal parts   ( 159 KB)

• CompatibilityTable   ( 225 KB)

Features

Using these valves in combination with a pressure compensation valve (MUV, MDM) achieves flow rate characteristics with pressure compensation according to the adjustment made with the flow rate adjusting screw.

• Electronic Catalogs   ( 622 KB)

• Cross-sectional views and seal parts   ( 140 KB)