Low noise level at 50 dB (A) achieved
in the pressure holding mode
A low noise level in comparison with
conventional hydraulic units is
achieved. It is 50 dB (A) in the pressure
holding mode at 7 MPa and to 70
dB (A) or lower even over the full
operation range.
All models conform to the machinery directive, EMC directive, and low voltage directive. This facilitates CE approval of the main machine.
5. IoT-ready
The IoT-compatible Daikin hybrid systems reduce waste and losses at factory sites.
With the hybrid system, it is possible to fetch information including not just hydraulic fluid pressures and flow rates but also internal information about the equipment such as power consumption and motor temperatures.
Remote control and setting changes are possible through
RS232C serial communication.
Using a commercially-available PLC or touch panel display with RS232C communication
capabilities, parameters for the pressure, flow rate, acceleration time, deceleration time
and so on can be set and viewed at the machine. This facilitates control of speeds and
pressurizing forces and enables a wide variety of machine operations.
Enables continuous control of pressures and flow rates as required.
The pressure and flow rate can be controlled continuously at the desired values by
inputting the pressure command voltage (0 to 10 V) and flow rate command voltage (0 to
10 V) from the machine side. This achieves a control system with a simple configuration
for machinery that requires variable speed control or continuity of pressurizing forces.